Connecting rod bushings are an important part of your engine, and they serve a vital function. These bushings connect the connecting rods to the crankshaft, and they allow the rods to move up and down smoothly as the pistons travel up and down in the cylinders. If you're looking for replacing your connecting rod bushings then you may visit http://wqusa.com/.
Image Source:Google
The Purpose of Connecting Rod Bushings
Just as the name suggests, connecting rod bushings connect the rod to the engine block. But these little parts do a lot more than that. In addition to keeping the connecting rod stable and secure, connecting rod bushings also help to reduce friction between the rod and the engine block. This, in turn, helps to improve engine efficiency and performance.
Connecting rod bushings are made from a variety of materials, including bronze, brass, and steel. The material you choose will depend on several factors, including the type of engine you have and your driving habits. For most applications, steel or bronze bushings are typically used.
Types of Connecting Rod Bushings
There are two types of connecting rod bushings: those that float on the connecting rod itself, and those that are press-fit into the housing.
The benefits of a floating bushing are that it can rotate freely on the connecting rod, which can reduce friction and wear. Additionally, it can help to dissipate heat better than a press-fit bushing.
How to Install Connecting Rod Bushings
1. Start by removing the old bushing. This can be done with a chisel and a hammer, or you can use a special removal tool if you have one.
2. Once the old bushing is out, clean up the area around the hole so that the new bushing will fit snugly.
3. Take your new bushing and tap it into place using a hammer. Make sure that it's seated properly before moving on.
